A mattress is only half a bed. What it sits on decides how it feels, how long it lasts and, in our case, whether the warranty applies. We make both halves in our Christchurch factory, so here's the straight answer to the question we get asked every day: "Can I put this mattress on the base I've already got?"
Quick answer
- Our mattresses are designed for a firm, flat platform base. That's what every bed set comes with.
- A pocket spring mattress on slats flexes between the gaps, feels different from the showroom, wears unevenly and loses some of its partner-disturbance benefit.
- If you're keeping an existing slatted or sprung base, the Opulence is the mattress we recommend for it.
- Match the size exactly: a Queen mattress on a Double base, or the reverse, isn't covered.
- If the bed set won't fit up the stairs, ask about a slimline base or a King base in two halves.
Why the base matters as much as the mattress
A spring unit is designed to push back against a solid surface. Put it on something that flexes and part of your weight is absorbed by the base instead of the springs, so the mattress feels softer and less supportive than it did in store. Over time the parts of the mattress over the gaps or the soft spots settle faster, which is how you get a mattress that sags in two years instead of ten. It's also why our warranty asks for a suitable base: we can't stand behind a mattress that's been working on the wrong foundation.
The four kinds of base, and where we stand on each
Platform base
A solid, flat, upholstered box. This is what we build, and what every Brownie's bed set comes on. It gives the spring unit an even surface to work against, it doesn't creak, and it puts the mattress at a sensible height. The standard base is covered in ticking to match the mattress; the Upholstered Bed Base upgrade in black, charcoal, beige or taupe gives a cleaner look without a valance. Our commercial bases are built on kiln-dried Southland beech and carry a lifetime guarantee against squeaking and breaking; the retail ones are made the same way.
Slatted base or bed frame
Wooden or metal slats across a frame. Good for airflow and easy to get into a tight room, but the mattress is only supported where the slats are. With widely spaced or bowed slats a pocket spring mattress flexes between them, which changes the feel and lets more movement through to your partner. If you love your slat frame, choose a mattress built for it: the Opulence has a TheraFoam encasement and a firm pocket spring unit that copes well on slats. Check the slats are no more than about 7 cm apart, none are cracked, and there's a centre rail on anything Queen or larger. We can supply slat beds too; ask your nearest store.
Sprung base
An older style with its own springs inside the base. Mattress technology has moved on and the extra springs no longer help; on a pocket spring mattress they work against the anti-partner-disturbance design. If you're buying a new mattress and your base is sprung, this is the time to replace both.
Adjustable base
Electric bases that raise the head and feet need a mattress that bends without damaging the spring unit. The iSleep Plush is built specifically for this: a soft pocket spring in a foam box that flexes with the base. Don't put a standard innerspring on an adjustable base.
Size, height and weight
Mattress and base should be the same size, to the centimetre. Our size chart has the NZ standard dimensions, and we make custom sizes for antique frames, boats and caravans where standard won't do.
Height is adjustable on our bases through the legs: castors and glides in 50, 85 or 145 mm at $5 per leg, or traditional wooden legs from 50 to 250 mm at $10 per leg. Taller legs make the bed easier to get out of and leave room for storage boxes underneath.
Weight capacity rarely comes up with a platform base, because the whole surface is carrying the load. It does come up with slat frames: look for a centre support rail and legs under it on Queen, King and Super King.
Getting it into the room
Mattresses bend a bit. Bases don't, and the base is usually what gets stuck. We deliver a lot of beds in Wellington, where a standard Queen base often won't make it up the stairs or round the landing. Three ways round it: a slimline base, which is narrower; a King, because King bases come in two halves that go up separately; or a mattress on its own with a slat frame that assembles in the room. Measure the tightest point on the way in before you order, and tell us about it; our delivery team will know what works.
Storage and other upgrades
A platform base can take divan drawers: one side on Single, King Single and Double sets, one or both sides on Queen, King and Super King. They're $290 for one side or $490 for both, and the drawers are on castors so they pull right out. In a small room they replace a chest of drawers.
Buying a mattress only? Run through this first
- Is the base the same size as the mattress you're buying?
- Is it flat and firm, with no sag, loose slats or broken springs?
- If it's slatted, are the gaps under 7 cm, with a centre rail on larger sizes?
- If it's sprung, are you sure you want to keep it?
- Will the new mattress fit through the door, round the stairs and under any overhead cupboards once it's on the base?
If you answered no to any of those, bring the measurements in and we'll sort out the base at the same time. We sell mattresses and bases separately, and matching them is quicker than fixing the problem later.
Frequently asked questions
Can any mattress go on any bed base?
No. Our mattresses are built for a firm platform base. Slats and sprung bases change how they feel and wear.
What's the best mattress for a slatted base?
The Opulence. Its foam encasement and firm pocket spring unit handle slats better than our other models.
Does the base change how firm a mattress feels?
Yes. A flexing base makes a mattress feel softer and less supportive than it did in store.
Do the mattress and base need to be the same size?
Yes, exactly. Overhang or gaps lead to uneven wear and aren't covered by warranty.
Is it better to buy the mattress and base together?
Usually. You know they match, the warranty is simple, and a bed set is cheaper than buying the two separately later.
Bring your measurements in
Come into any of our stores with the size of your base and the tightest doorway on the way to the bedroom, and we'll tell you what fits. Or call 0800 276 964.
Related guides: FAQ: mattress base options · NZ mattress sizes · Custom made beds · How often should you rotate your mattress